Product Description
1. This machine adopts PLC control technique, both separate-phases welding and welding time composed of digital and integrated electric circuit, more intelligent and rational, once pressing, and separate welding or welding at the same time.
2. The line wire is fed from coils; the cross wire is pre-cut, fed from hopper driven by step motor.
3. Mesh pulling system adopts servo motor back and forward to ensure the mesh opening accurately and can be adjusted freely within a certain range.
Composition of Whole Production Line
| No. |
Name of each part |
| 1 |
WZ-2500A CNC BRC Roll Mesh Welding Machine |
| 2 |
Cross Wire Automatic Falling Hopper |
| 3 |
Line Wire Straightening Device |
| 4 |
Operation Control Cabinet |
| 5 |
Wire Straightening and Cutting Machine |
| 6 |
Automatic Precise High Speed Cutting Mesh Machine |
| 7 |
Automatic Rolling Mesh Machine |
| 8 |
Wire Pay-off |
| 9 |
Water Cooling System |
| 10 |
Level Spare Parts Box |
Product Parameters
| Welding Wire Diameter Range |
Φ3.0-6.0(mm) |
| Mesh Size |
150*150-300*300mm adjustable |
| Mesh Length |
500-3000mm or 30m roll mesh(automatic cutting mesh according to the practical needs) |
| Max Mesh Width |
2500mm |
| Number of Electrodes |
17 |
| Welding Speed |
0-80times/min |
| Rated Voltage |
380V±10% 50HZ Three phase |
| Rated Power |
160KVA*4(Water cooling system) |
| Main Motor |
4.0KW (Electromagnetic Brake Motor) |
| Welding Time |
10ms-100ms |
| Control Way |
PLC+Touch Screen |
| Welding Way |
By Control Silicon Control Electric Resistance Weld |
| Pressure Mode |
Adjustable Spring Pressure |
Cross Wire Automatic Falling Hopper:
It is mainly used to feed cross wires automatically,and it will be installed with the special inspection switch, If there is no drop wire, it will alarm automatically, then the worker can adjust it, then it can return to go on producing. This can greatly reduce the equipment failure and the wire mesh damage rate.
Line Wire Straightening Device:
It is mainly used to straighten line wires
Automatic Precise High Speed Cutting Mesh Machine
Cutting wire diameter: 2.5mm-6.0mm
Max. cutting width:2500mm
Motor:7.5KW
(Electromagnetic Brake Motor)
Automatic rolling mesh machine
Max. width 2500mm
Motor:2.2KW
Control way: frenquency (speed adjustable)
Wire Straightening and Cutting Machine
Wire diameter:2.5mm-6.0mm
Max. length 2500mm
Straightening motor:2.2kw
Cutting motor:1.5kw
Wire Pay-off
They are mainly used to put wires to support the mesh welding machine and wire straightening and cutting machine,can load about 300-350kgs/pcs
Packaging & Shipping
Main machine packed by plastic film and then fixed to container by wire rope, spare parts loaded in wodden box
Certifications
){kind=link}
){kind=link}